Superior PTFE+EPDM Butterfly Valve Seal for Assured Performance
| Material: | PTFE+EPDM | Media: | Water,Oil,Gas,Base,oil And Acid |
|---|---|---|---|
| Port Size: | DN50-DN600 | Application: | High Temperature Conditions |
| Product Name: | Wafer Type Centerline Soft Sealing Butterfly Valve,pneumatic Wafer Butterfly Valve | Connection: | Wafer,Flange Ends |
| Valve Type: | Butterfly Valve,Lug Type Double Half Shaft Butterfly Valve Without Pin | ||
| High Light: |
seat butterfly valve, ptfe seat ball valve |
||
Black/ Green PTFE/ FPM +EPDM Rubber Valve Seat for Butterfly Valve Seat
PTFE + EPDM compounded rubber valve seats produced by SML are widely used in textile, power station, petrochemical, heating and refrigeration, pharmaceutical, shipbuilding, metallurgy, light industry, environmental protection and other fields.
Product performance: high temperature resistance, good acid and alkali resistance and oil resistance; with good rebound resilience, sturdy and durable without leaking.
PTFE+EPDM
The Teflon (PTFE) liner overlays EPDM which is bonded to a rigid phenolic ring on the outside seat perimeter. The PTFE extends over the seat faces and outsides flange seal diameter, completely covering the EPDM elastomer layer of the seat, which provides the resilience for sealing valve stems and the closed disc.
Temperature range: -10°C to 150°C.
Virgin PTFE (Polytetrafluoroethylene)
PTFE (Teflon) is a fluorocarbon based polymer and typically is the most chemically resistant of all plastics, while retaining excellent thermal and electrical insulation properties. PTFE also has a low coefficient of friction so it is ideal for many low torque applications.
This material is non-contaminating and accepted by the FDA for food applications. Although the mechanical properties of PTFE is low, comparing to other engineered plastics, its properties remain useful over a wide temperature range.
Temperature range: -38°C to +230°C.
Color: white
Torque adder: 0%
Heat / Cold Resistance of different rubbers
| Rubber Name | Short Name | Heat Resistance ℃ | Cold Resistance ℃ |
| Natural Rubber | NR | 100 | -50 |
| Nitrle Rubber | NBR | 120 | -20 |
| Polychloroprene | CR | 120 | -55 |
| Styrene Butadiene copolyme | SBR | 100 | -60 |
| Silicone Rubber | SI | 250 | -120 |
| Fluororubber | FKM/FPM | 250 | -20 |
| Polysulfide Rubber | PS / T | 80 | -40 |
| Vamac(Ethylene/Acrylic) | EPDM | 150 | -60 |
| Butyl Rubber | IIR | 150 | -55 |
| Polypropylene Rubber | ACM | 160 | -30 |
| Hypalon. Polyethylene | CSM | 150 | -60 |
The application of these seals spans a diverse array of environments, including but not limited to, water, oil, gas, base oils, and acids, showcasing their unmatched versatility. Designed to cater to a wide range of port sizes from DN50 to DN600, the Teflon butterfly valve sealing ring ensures a seamless fit and operational excellence in high-temperature conditions, highlighting its pivotal role in industries such as textile, power stations, petrochemical, and more. Further elevating its appeal is the wafer type centerline soft sealing butterfly valve alongside the pneumatic wafer butterfly valve, both of which are ingeniously designed to provide a robust connection through either wafer or flange ends. This innovative approach not only simplifies the installation process but also significantly enhances the valve's performance by ensuring a leak-proof seal. The versatility extends to its compatibility with butterfly valves, including the lug type double half shaft butterfly valve without pin, catering to a broad spectrum of industrial needs. With such meticulous attention to detail and a relentless pursuit of quality, the Teflon butterfly valve sealing ring by SanSheng Fluorine Plastics stands as a beacon of reliability and efficiency in the challenging industrial landscape.