Premium Sanitary Compound Butterfly Valve Liner - Durable & Efficient
| Material: | PTFE+EPDM | Media: | Water,Oil,Gas,Base,oil And Acid |
|---|---|---|---|
| Port Size: | DN50-DN600 | Application: | High Temperature Conditions |
| Product Name: | Wafer Type Centerline Soft Sealing Butterfly Valve,pneumatic Wafer Butterfly Valve | Connection: | Wafer,Flange Ends |
| Valve Type: | Butterfly Valve,Lug Type Double Half Shaft Butterfly Valve Without Pin | ||
| High Light: |
seat butterfly valve, ptfe seat ball valve |
||
Black/ Green PTFE/ FPM +EPDM Rubber Valve Seat for Butterfly Valve Seat
PTFE + EPDM compounded rubber valve seats produced by SML are widely used in textile, power station, petrochemical, heating and refrigeration, pharmaceutical, shipbuilding, metallurgy, light industry, environmental protection and other fields.
Product performance: high temperature resistance, good acid and alkali resistance and oil resistance; with good rebound resilience, sturdy and durable without leaking.
PTFE+EPDM
The Teflon (PTFE) liner overlays EPDM which is bonded to a rigid phenolic ring on the outside seat perimeter. The PTFE extends over the seat faces and outsides flange seal diameter, completely covering the EPDM elastomer layer of the seat, which provides the resilience for sealing valve stems and the closed disc.
Temperature range: -10°C to 150°C.
Virgin PTFE (Polytetrafluoroethylene)
PTFE (Teflon) is a fluorocarbon based polymer and typically is the most chemically resistant of all plastics, while retaining excellent thermal and electrical insulation properties. PTFE also has a low coefficient of friction so it is ideal for many low torque applications.
This material is non-contaminating and accepted by the FDA for food applications. Although the mechanical properties of PTFE is low, comparing to other engineered plastics, its properties remain useful over a wide temperature range.
Temperature range: -38°C to +230°C.
Color: white
Torque adder: 0%
Heat / Cold Resistance of different rubbers
| Rubber Name | Short Name | Heat Resistance ℃ | Cold Resistance ℃ |
| Natural Rubber | NR | 100 | -50 |
| Nitrle Rubber | NBR | 120 | -20 |
| Polychloroprene | CR | 120 | -55 |
| Styrene Butadiene copolyme | SBR | 100 | -60 |
| Silicone Rubber | SI | 250 | -120 |
| Fluororubber | FKM/FPM | 250 | -20 |
| Polysulfide Rubber | PS / T | 80 | -40 |
| Vamac(Ethylene/Acrylic) | EPDM | 150 | -60 |
| Butyl Rubber | IIR | 150 | -55 |
| Polypropylene Rubber | ACM | 160 | -30 |
| Hypalon. Polyethylene | CSM | 150 | -60 |
Crafted from a sophisticated blend of PTFE and EPDM, this innovative liner is engineered to withstand the harshest environments — from high temperatures to corrosive substances. The versatility of the material composition allows for optimal functioning in a diverse range of media including water, oil, gas, base oil, and even acidic substances, ensuring a seal that is not only tight but also resilient against wear and chemical degradation. This makes the Teflon butterfly valve sealing ring an indispensable asset in sectors such as textile, power generation, petrochemical, HVAC, pharmaceutical, shipbuilding, metallurgy, and more, significantly enhancing operational reliability and efficiency. Spanning port sizes from DN50 to DN600, our sanitary compound butterfly valve liner is meticulously designed for wafer and flange-end connections, accommodating a wide spectrum of piping systems. Its exceptional design facilitates easy installation and maintenance, embodying the perfect combination of a wafer-type centerline with a soft-sealing butterfly valve, including variants such as the pneumatic wafer butterfly valve and the lug type double half shaft butterfly valve without pin. This, coupled with its standout features like high temperature resistance and compatibility with a multitude of media, positions the Teflon butterfly valve sealing ring by Sansheng Fluorine Plastics not just as a product but as a cornerstone of industrial fluid management.