Keystone Resilient Seated Butterfly Valve for Industrial Use
| Material: | PTFE+EPDM | Media: | Water,Oil,Gas,Base,oil And Acid |
|---|---|---|---|
| Port Size: | DN50-DN600 | Application: | High Temperature Conditions |
| Product Name: | Wafer Type Centerline Soft Sealing Butterfly Valve,pneumatic Wafer Butterfly Valve | Connection: | Wafer,Flange Ends |
| Valve Type: | Butterfly Valve,Lug Type Double Half Shaft Butterfly Valve Without Pin | ||
| High Light: |
seat butterfly valve, ptfe seat ball valve |
||
Black/ Green PTFE/ FPM +EPDM Rubber Valve Seat for Butterfly Valve Seat
PTFE + EPDM compounded rubber valve seats produced by SML are widely used in textile, power station, petrochemical, heating and refrigeration, pharmaceutical, shipbuilding, metallurgy, light industry, environmental protection and other fields.
Product performance: high temperature resistance, good acid and alkali resistance and oil resistance; with good rebound resilience, sturdy and durable without leaking.
PTFE+EPDM
The Teflon (PTFE) liner overlays EPDM which is bonded to a rigid phenolic ring on the outside seat perimeter. The PTFE extends over the seat faces and outsides flange seal diameter, completely covering the EPDM elastomer layer of the seat, which provides the resilience for sealing valve stems and the closed disc.
Temperature range: -10°C to 150°C.
Virgin PTFE (Polytetrafluoroethylene)
PTFE (Teflon) is a fluorocarbon based polymer and typically is the most chemically resistant of all plastics, while retaining excellent thermal and electrical insulation properties. PTFE also has a low coefficient of friction so it is ideal for many low torque applications.
This material is non-contaminating and accepted by the FDA for food applications. Although the mechanical properties of PTFE is low, comparing to other engineered plastics, its properties remain useful over a wide temperature range.
Temperature range: -38°C to +230°C.
Color: white
Torque adder: 0%
Heat / Cold Resistance of different rubbers
| Rubber Name | Short Name | Heat Resistance ℃ | Cold Resistance ℃ |
| Natural Rubber | NR | 100 | -50 |
| Nitrle Rubber | NBR | 120 | -20 |
| Polychloroprene | CR | 120 | -55 |
| Styrene Butadiene copolyme | SBR | 100 | -60 |
| Silicone Rubber | SI | 250 | -120 |
| Fluororubber | FKM/FPM | 250 | -20 |
| Polysulfide Rubber | PS / T | 80 | -40 |
| Vamac(Ethylene/Acrylic) | EPDM | 150 | -60 |
| Butyl Rubber | IIR | 150 | -55 |
| Polypropylene Rubber | ACM | 160 | -30 |
| Hypalon. Polyethylene | CSM | 150 | -60 |
Crafted for convenience, the valve boasts a wafer-type centerline with soft sealing capabilities, ensuring a tight shut-off and minimal leakage. Its design encompasses both wafer and flange ends, enabling easy installation across a variety of piping configurations. The valve's dimensions accommodate a broad spectrum of port sizes ranging from DN50 to DN600, making it a flexible option for diverse piping diameters. Furthermore, the pneumatic wafer butterfly valve variant offers enhanced control, allowing for efficient flow regulation and operational excellence. Our Keystone resilient seated butterfly valve stands out with its lug type double half shaft design, eliminating the need for a pin and thus reducing potential points of failure. This attention to detail underscores our commitment to providing products that not only meet but exceed industry standards for reliability and performance. Additionally, the valve's seat is available in both black and green PTFE/FPM+EPDM rubber, signifying our dedication to offering options that cater to different operational needs and preferences. With Sansheng Fluorine Plastics, you are choosing a partner who is dedicated to innovation, quality, and customer satisfaction. Let our keystone resilient seated butterfly valve be the cornerstone of your fluid control systems, ensuring efficiency, reliability, and operational excellence across all your applications.