Keystone Resilient Butterfly Valve Sealing Ring | Sansheng Fluorine
| Material: | PTFE+EPDM | Media: | Water,Oil,Gas,Base,oil And Acid |
|---|---|---|---|
| Port Size: | DN50-DN600 | Application: | High Temperature Conditions |
| Product Name: | Wafer Type Centerline Soft Sealing Butterfly Valve,pneumatic Wafer Butterfly Valve | Connection: | Wafer,Flange Ends |
| Valve Type: | Butterfly Valve,Lug Type Double Half Shaft Butterfly Valve Without Pin | ||
| High Light: |
seat butterfly valve, ptfe seat ball valve |
||
Black/ Green PTFE/ FPM +EPDM Rubber Valve Seat for Butterfly Valve Seat
PTFE + EPDM compounded rubber valve seats produced by SML are widely used in textile, power station, petrochemical, heating and refrigeration, pharmaceutical, shipbuilding, metallurgy, light industry, environmental protection and other fields.
Product performance: high temperature resistance, good acid and alkali resistance and oil resistance; with good rebound resilience, sturdy and durable without leaking.
PTFE+EPDM
The Teflon (PTFE) liner overlays EPDM which is bonded to a rigid phenolic ring on the outside seat perimeter. The PTFE extends over the seat faces and outsides flange seal diameter, completely covering the EPDM elastomer layer of the seat, which provides the resilience for sealing valve stems and the closed disc.
Temperature range: -10°C to 150°C.
Virgin PTFE (Polytetrafluoroethylene)
PTFE (Teflon) is a fluorocarbon based polymer and typically is the most chemically resistant of all plastics, while retaining excellent thermal and electrical insulation properties. PTFE also has a low coefficient of friction so it is ideal for many low torque applications.
This material is non-contaminating and accepted by the FDA for food applications. Although the mechanical properties of PTFE is low, comparing to other engineered plastics, its properties remain useful over a wide temperature range.
Temperature range: -38°C to +230°C.
Color: white
Torque adder: 0%
Heat / Cold Resistance of different rubbers
| Rubber Name | Short Name | Heat Resistance ℃ | Cold Resistance ℃ |
| Natural Rubber | NR | 100 | -50 |
| Nitrle Rubber | NBR | 120 | -20 |
| Polychloroprene | CR | 120 | -55 |
| Styrene Butadiene copolyme | SBR | 100 | -60 |
| Silicone Rubber | SI | 250 | -120 |
| Fluororubber | FKM/FPM | 250 | -20 |
| Polysulfide Rubber | PS / T | 80 | -40 |
| Vamac(Ethylene/Acrylic) | EPDM | 150 | -60 |
| Butyl Rubber | IIR | 150 | -55 |
| Polypropylene Rubber | ACM | 160 | -30 |
| Hypalon. Polyethylene | CSM | 150 | -60 |
Crafted from a robust combination of PTFE and EPDM, this sealing ring is specifically designed to offer unparalleled resistance against a wide range of media such as water, oil, gas, base oil, and even corrosive acids. The unique properties of PTFE provide exceptional thermal stability and chemical inertness, while EPDM contributes outstanding resilience and weatherability, making this sealing ring an ideal choice for applications subjected to high-temperature conditions and aggressive media. Our wafer type centerline soft sealing butterfly valve, including the pneumatic wafer butterfly valve option, showcases a sophisticated design that guarantees optimal performance. With port sizes ranging from DN50 to DN600, our valves are versatile enough to accommodate a broad spectrum of flow control tasks. The innovative wafer and flange end connections, coupled with the choice between lug type double half shaft butterfly valve without pin, ensure a secure and leak-free installation in any setup. Whether it's seat butterfly valves or ptfe seat ball valves you're after, our keystone resilient butterfly valve sealing ring stands out as a cornerstone for reliability and efficiency in challenging industrial environments.