High-Quality Bray Butterfly Valve Liner - Sansheng Fluorine Plastics
| Material: | PTFE+EPDM | Media: | Water,Oil,Gas,Base,oil And Acid |
|---|---|---|---|
| Port Size: | DN50-DN600 | Application: | High Temperature Conditions |
| Product Name: | Wafer Type Centerline Soft Sealing Butterfly Valve,pneumatic Wafer Butterfly Valve | Connection: | Wafer,Flange Ends |
| Valve Type: | Butterfly Valve,Lug Type Double Half Shaft Butterfly Valve Without Pin | ||
| High Light: |
seat butterfly valve, ptfe seat ball valve |
||
Black/ Green PTFE/ FPM +EPDM Rubber Valve Seat for Butterfly Valve Seat
PTFE + EPDM compounded rubber valve seats produced by SML are widely used in textile, power station, petrochemical, heating and refrigeration, pharmaceutical, shipbuilding, metallurgy, light industry, environmental protection and other fields.
Product performance: high temperature resistance, good acid and alkali resistance and oil resistance; with good rebound resilience, sturdy and durable without leaking.
PTFE+EPDM
The Teflon (PTFE) liner overlays EPDM which is bonded to a rigid phenolic ring on the outside seat perimeter. The PTFE extends over the seat faces and outsides flange seal diameter, completely covering the EPDM elastomer layer of the seat, which provides the resilience for sealing valve stems and the closed disc.
Temperature range: -10°C to 150°C.
Virgin PTFE (Polytetrafluoroethylene)
PTFE (Teflon) is a fluorocarbon based polymer and typically is the most chemically resistant of all plastics, while retaining excellent thermal and electrical insulation properties. PTFE also has a low coefficient of friction so it is ideal for many low torque applications.
This material is non-contaminating and accepted by the FDA for food applications. Although the mechanical properties of PTFE is low, comparing to other engineered plastics, its properties remain useful over a wide temperature range.
Temperature range: -38°C to +230°C.
Color: white
Torque adder: 0%
Heat / Cold Resistance of different rubbers
| Rubber Name | Short Name | Heat Resistance ℃ | Cold Resistance ℃ |
| Natural Rubber | NR | 100 | -50 |
| Nitrle Rubber | NBR | 120 | -20 |
| Polychloroprene | CR | 120 | -55 |
| Styrene Butadiene copolyme | SBR | 100 | -60 |
| Silicone Rubber | SI | 250 | -120 |
| Fluororubber | FKM/FPM | 250 | -20 |
| Polysulfide Rubber | PS / T | 80 | -40 |
| Vamac(Ethylene/Acrylic) | EPDM | 150 | -60 |
| Butyl Rubber | IIR | 150 | -55 |
| Polypropylene Rubber | ACM | 160 | -30 |
| Hypalon. Polyethylene | CSM | 150 | -60 |
The cornerstone of our product line, the Bray Butterfly Valve Liner, is tailored to cater to a broad range of applications, including, but not limited to, water, oil, gas, base oils, and even corrosive acids. Its exceptional compatibility with wafer type centerline soft sealing butterfly valves and its adaptability to both pneumatic wafer butterfly valves as well as lug type double half shaft butterfly valves without pin, underline its versatility and efficiency in operational deployment. Moreover, its robust construction enables it to withstand high-temperature scenarios seamlessly, making it an ideal choice for sectors like textile, power stations, petrochemical industries, heating and refrigeration systems, pharmaceuticals, shipbuilding, metallurgy, light industry, and environmental protection. With port sizes ranging from DN50 to DN600, our Bray Butterfly Valve Liner is engineered to ensure a perfect fit and optimal performance, further reinforcing our commitment to quality and customer satisfaction.