Babban Teflon malam buɗe ido na Balv - Babban Seals
| Abu: | PTFE + EPDM | Kafofin watsa labarai: | Ruwa, mai, gas, gindi, mai da acid |
|---|---|---|---|
| Girman tashar jiragen ruwa: | DN50 - DN600 | Aikace-aikacen: | Yanayin zazzabi mai zafi |
| Sunan samfurin: | Wafer irin cibiyar taushi taushi mai laushi mai laushi, herumatic wafer malam buɗe ido | Haɗin: | Wafer, flangen ya ƙare |
| Nau'in bawul: | Buttocking bawul, Lug Type ninki biyu Raft malam buɗe ido ba tare da fil ba | ||
| Babban haske: |
batsa mai batsa, bawul din ptfe |
||
Black / Green PTFE / FPM + EPDM Roba Balve Sevel
PTFE + EPDM ya hada da semon bawul na roba wanda aka samar da shi sosai a rubutu, tashar Perrochemical, da mai fama, masana'antar ruwa, kare muhalli da sauran filayen.
Aiki na Samfuta: babban zazzabi mai zafi, acid mai kyau da kuma juriya da Alkali; Tare da kyakkyawan sake dawowa, sturdy da mai dorewa ba tare da fashewa ba.
Ptfe+ EPDM
Teflon (PTFE) Liner ta mamaye epdm wanda aka ɗaure ga tsayayyen zobe na tabo a waje na gefen kujerar. The PTFE extends over the seat faces and outsides flange seal diameter, completely covering the EPDM elastomer layer of the seat, which provides the resilience for sealing valve stems and the closed disc.
Rahotuta: - 10 ° C zuwa 150 ° C.
Virgin Ptfe (polytetrashluoorethylene)
PTFE (Teeflon) Polymer ne na Polymer kuma yawanci shine mafi yawan rudani na dukkanin robobi, yayin da suke riƙe da kaddarorin da wutar lantarki na lantarki. PTFE kuma yana da ƙarancin ƙwarewa don haka yana da kyau ga aikace-aikacen low Torque.
Wannan kayan ba shi bane - gurbata ne kuma an yarda da shi don aikace-aikacen abinci. Kodayake kayan aikin na PTFitories na PTFE na ƙasa, idan aka kwatanta da sauran robobi na injiniya, kayan aikin sa suna da amfani akan kewayon zafin jiki.
Rahotuta: - 38 ° a + 230 ° C.
Launi: fari
Torque Aderin: 0%
Heat / Cold Colle juriya na daban-daban
| Sunan roba | Short suna | Heat juriya ℃ | Cold juriya ℃ |
| Roba na zahiri | NR | 100 | -50 |
| Nitrle roba | Nbr | 120 | -20 |
| Pohychloroprene | CR | 120 | -55 |
| Styrene butleadiene Copolyme | Sb | 100 | -60 |
| Roba silicone | SI | 250 | -120 |
| Fluororubber | Fkm / fpm | 250 | -20 |
| Polysulfide Roba | Ps / t | 80 | -40 |
| Vamac (ethylene / acrylic) | EXDM | 150 | -60 |
| Butyl Roba | Iir | 150 | -55 |
| Polypropylene roba | ACM | 160 | -30 |
| Hypalon. Polyethylene | Csm | 150 | -60 |
Amfani da PTFE (PolyteTraflafluorethylene) a cikin haɗin kai tare da EPDM (Ethylene Propylelene Diene Monomer ba kawai ya ba da rudani ga spectrum mai yawa - Daga ruwa, mai, gas har ma da mafi yawan tasirin ƙasa da acid. Wannan tsarin kayan ya tabbatar da cewa alfarwar mu na Teflon malamai suna isar da daidaitattun ayyukan DN50 - DN600, malam buɗe ido a cikin tashar jiragen ruwa na DN30 - DN600, malam buɗe ido a cikin tashar jiragen ruwa na DN30 - DN600, malam buɗe ido a cikin tashar jiragen ruwa na DN30 - DN600, malam buɗe ido a cikin tashar jiragen ruwa ta DN30 - DN600, malam buɗe ido a cikin tashar jiragen ruwa na DN30 - DN600, malamai marasa amfani ga hanyar tashar jiragen ruwa. . Ko dai don nau'in weraf na da ke tattare da ƙawancen malam buɗe ido ko lug sau biyu rabin taft breuble ba tare da pin ba, samfurinmu ya isa ya sadu da bukatunku. A aikace-aikace na aikace-aikacen sa a kan masana'antu kamar rubutu, tashoshin wutar lantarki, hvac, karaduwar masana'antu, da karewar muhalli, a tsakanin wasu. Tare da filayen filastik 'Teflon malam buɗe ido na Balunƙwuri, kuma haɓaka amincin da ingancin tsarin sarrafawa na ruwa zuwa New Heights.